How should your Akupanel | Moss mounted?
Akupanel | Moss
Moss panel
You will need this:
Moss panels are easy to mount – all you have to do is to drive screws through the felt and into the wall. It’s as simple as that.
You can find screws here.
If you would rather glue the panels onto the wall you can find the glue here.
For a beautiful finish on your wall buy our Trim Lamellas here (each lamella is 94 1/2″):
Step 1: Measure the wall and fasten the screws
Measure your wall and mark where you want the panels to be mounted. Use a bubble level in order to make it straight. Drive the screws through the moss and a bit into the felt, so they’re ready for being mounted onto the wall.
Step 2: Mount the panels with screws
Mount the panels by driving the fastened 1.18 in screws (screws not included) into the wall in the desired spot. Use 4-5 screws per panel.
Step 3: Mount the panels with glue
If you want to glue the panels to your wall instead – put glue on the felt side of the panel, and press the panel against the wall in the desired spot. Hold the panel and press it against the wall for around 10-15 seconds.
Step 4: Cutting the panels
If the panels need to be cut in size you can use a pocket knife. Cut from the felt side for an even cut.
Step 5: Add a beautiful finish with Trim Lamellas
If you want to add a beautiful finish to your moss wall you can add end lamellas to the sides of the panel area. Cut trim lamellas to the wished length with a circular saw, and make sure to cut the ends in bevel.
Now you are done!
Are things not going as planned? We are here for you if you need help.
Call us
Send us an email
Business hours
Monday to Friday: 8.30am-4.30