• Frontpage
  • Blog
  • How To Make A Headboard With Slats (Acoustical Panels)

How To Make A Headboard With Slats (Acoustical Panels)

Would you like to do something extraordinary in your bedroom?

How about creating a very nice headboard above your bed, that will make your room twice as nice with only a few hours work. We will show you how it is done – step by step.

It’s a project that anyone should be able to do themselves. And what a difference it makes!

Enjoy the video!

What you will need:

  • A level
  • A ruler
  • A saw, circular saw or a wagtail.
  • Screws
  • A hollow drill

… and of course some acoustical panels.

Step 1: Horizontally or vertically?

There are more than one way make a headboard. You can choose to either do it with vertical slats or horizontal slats.

The first step is for you to decide on what you want to do.

Step 2: Find the middle of the wall. 

First and foremost you need to find out where to place the panels. Most people chose to place the panels precisely in the middle of the wall behind the bed, which I personally find to be the best looking solution.

Put markings on the wall where you want to place the panels with a pencil.

Step 3: Cut the panels. 

An acoustical panels is 240 cm in length and 60 cm wide. Depending on the width of your bed, you might have to cut the panels in order to make it fit. You can cut the lamellas with either a normal saw, a circular saw or a jigsaw.

The filt can be cut by using any knife – it’s super easy.

If you have to fit electrical outlets on the headboard, then you start drilling a hole for the saw – you can see how to in the video above.

Step 4: Mount the panels on the wall.

When you have to install the panels directly on the wall, then you have to check what type of wall it is. In the video above it’s a drywall so in this case we can drive a screw directly through the felt and into the wall.

If it’s a concrete wall that you have, you would have to drill holes and use plugs before hand.

Step 5: Done – enjoy your masterpiece.

That wasn’t that hard was it? Now – all you need to do is to brag about your craftsman abilities and your great sense of style. So whenever you get the chance, you should show off 😉

And you could also post a nice picture on Instagram (#mywoodupp) – we would love to see it.

previous arrow
next arrow
Slider

Are you ready to do your own DIY-project?

We have several colours to choose from – click here to the overview over the different panels >>

If you want to see the colours and feel the fabric before you decide, then you can order samples – click here to order samples >>

#mywoodupp

Find more inspiration on Instagram

Trackback from your site.

Leave a comment

You must be logged in to post a comment.

WoodUpp på Facebook    WoodUpp på Instagram    WoodUpp på Pinterest

CVR: 36924187       Industrivej 53, 6760 Ribe, Denmark       +45 71 74 14 32        mej@woodupp.com

Terms and conditions

Webshop is developed by Hype Media